19/11/2026
19/11/2026
This caught the attention of a Canadian engineer of Egyptian origin, who proposed that the government lift restrictions on maximum truck loads in exchange for an annual fee. The revenue generated would then be allocated to maintaining and repairing roads damaged by the heavier loads. The proposal was adopted and delivered significant economic benefits, particularly amid growing trade competition with producers from other countries.
In Kuwait, the Ministry of Public Works faces a similar challenge. The country’s roads are not designed to withstand the weight of heavy truck loads, making the right-hand lanes of highways more vulnerable to wear, erosion, and subsidence than other lanes. During a recent meeting attended by road officials from the Ministry of Public Works and Kuwait Municipality, along with the First Deputy Prime Minister and Minister of Interior, several proposals were presented to address the problem. These included imposing weight restrictions on trucks to prevent them from exceeding specified load limits. The meeting also discussed revising road paving specifications to provide additional reinforcement and maintenance for the right-hand lanes, which are commonly used by heavy trucks, as well as considering other measures to protect road infrastructure.
Truck owners should be allowed to exceed the existing weight restrictions, provided their vehicles do not carry excessive loads and they pay an annual fee. The revenue collected would then be allocated to maintaining and repairing truck lanes. To prevent manipulation or evasion of the annual fee, mobile checkpoints equipped with weighing devices could be deployed to inspect trucks, verify their loads, and ensure that the required fees have been paid.
Advanced mobile weighing systems designed specifically for this purpose are already used by traffic and regulatory authorities during surprise inspections. Portable axle-load scales are also available and can be placed directly on road surfaces to measure truck weights.
Another option is portable truck weighing systems, which consist of interconnected steel or iron platforms that can be quickly installed on any solid, level surface without requiring the deep concrete foundations needed for permanent weighing stations. These platforms can be dismantled, transported by truck to another location, and reassembled as needed. For the system to function accurately, each truck’s empty weight and maximum load capacity must be clearly recorded on its body and in its official registration documents.
Email: [email protected]
