Thursday, March 12, 2026
 
search-icon

Film cameras are back in style in age of digital

publish time

12/03/2026

publish time

12/03/2026

Film cameras are back in style in age of digital

NEW YORK, March 12, (AP): Film photography has been undergoing a renaissance, especially with younger people who love its unique look and analog vibe. But while Gen-Zers and younger Millennials embrace film, analog cameras are not as easy to use as the digital cameras they grew up with. What does ISO mean? What is an f/stop anyway? How do I figure out the right aperture? George Walker IV, an Associated Press photojournalist based in Nashville, helped outline the basics of film-based photography for this week’s One Tech Tip. Walker, who joined the AP in 2023 after 30 years as a photographer at The Tennessean newspaper, said shooting on film is a good way to learn the basics of photography because it “forces me to be patient and concentrate to make the pictures that matter.”

“You have a finite number of frames on a roll of 35 mm film, usually 24 or 36. And you should make those pictures count.” Before the advent of digital cameras in the early 2000s, photography relied on physical film instead of electronic files stored on memory chips. Photographic film is a light-sensitive cellulose material used for making images, by exposing the silver-halide coating through the camera lens to create a latent image on the film that’s then used for making photographic prints. This results in pictures with a distinctive grainy or unfiltered feel that attracts analog fans turned off by digital photos that seem too perfect. Enthusiasts are also drawn to film as an antidote to digital fatigue and the instant gratification of their smartphones.

It’s part of a broader revival of old-school hobbies and content that includes vinyl records, knitting and writing letters. There are multiple formats but the type used in most consumer cameras is 35 mm, which comes in little canisters. Buy it at a photo shop or online. Some drugstores also sell film but the selection is often limited. When buying film, pay attention to the ISO rating, also known as the film speed. The higher the number, the more sensitive the film is to light. For making photographs in a low-light situation, like a basketball gym or a night football game, photographers might use a film rated at ISO 1600 or higher. To capture a scene in full sun, ISO 400 or less is best. Beginners should consider black and white film, which is more forgiving than color for exposures and forces you to focus on a shot’s composition and lighting. Nowadays, new film cameras are limited to a handful of point-and-shoot, niche or high-end models.

However, there are plenty of secondhand vintage models for sale on eBay and at camera shops. Or try asking around to see if anyone you know has an old camera sitting forgotten in a drawer. Look for a model from one of the big five camera makers that dominated the pre-digital photo era: Canon, Nikon, Pentax, Olympus and Minolta. Point and shoot cameras are small, cheap, and easy to carry around and use. They typically don’t have any controls, except for a button to turn the flash on. Single-lens reflex, or SLR, cameras, let you go fully manual. They have lots of dials and adjustments, and the ability to swap lenses, so you can make great pictures. If you do want to learn and experiment, a fully manual camera is best. But they’re also bigger and bulkier and can be intimidating for novices. If you can’t decide, a good rule of thumb is that the best camera is always the one you have with you.

Now that you’ve got film and a camera, it’s time to put them together. With a manual camera, open the back and feed the film leader, or tip, into a slot on the spool on the right. Use the winding lever to advance the film to make sure it’s latched on properly. Close the camera back. When you wind the film, the rewind knob on the left will turn if the film is loaded correctly. The process is a little easier with point and shoot cameras, which usually have automatic winding. There should be a label inside indicating where to position the film leader. If not done correctly, you’ll either get an error message or the film counter won’t advance. Now that the film is loaded, be sure to keep the camera back closed until you’re finished making exposures and the film is fully rewound into the canister, otherwise you’ll ruin the whole roll.